Rukus Wireless ZoneFlex 7731 Guide de l'utilisateur télécharger pdf (Page 64)

Configuring the Access Point

Configuring Wireless Settings

Figure 28. Configuring local subnets and enabling router mode

Configuring Wireless Settings

This section describes how to configure the wireless settings of the Access Point.

There are two types of wireless settings that you need to configure:

■ Configuring Common Wireless Settings: Includes the wireless mode, country

code, and advanced wireless settings, such as the wireless transmit power and

wireless protection mode. These settings are applied to all WLANs.

■ Configuring Wireless # Settings: The Wireless # tabs (“Wireless 1” through

“Wireless 8” on the 2.4GHz radio and “Wireless 9” through “Wireless 16” on the

5GHz radio) provide settings for customizing each WLAN individually.

Refer to the sections below for instructions on how to configure each set of wireless

settings.

Configuring Common Wireless Settings

Common wireless settings are settings that are applied to all WLANs. On single radio

APs, go to Configuration > Wireless. On dual radio APs, you configure these settings

for the 2.4GHz and 5GHz radios independently by going to Configuration > Radio

2.4G or Configuration > Radio 5G.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 119 120

Pas de commentaire

Rukus Wireless ZoneFlex 7731 Guide de l'utilisateur Page 64