Rukus Wireless ZoneFlex 7731 Guide de l'utilisateur télécharger pdf (Page 51)

Navigating the Web Interface

Logging Into the ZoneFlex Web Interface

If you need to manage your AP, you do it with the features of the ZoneFlex Web

interface (which you already used to set up the AP for use).

If your ZoneFlex network will be managed by a Ruckus Wireless ZoneDirector, you can

manage APs through ZoneDirector rather than logging into each AP’s Web interface

individually.

NOTE: The following procedure assumes that you know the static IP address of the

AP (now in use), or you have some means of determining the dynamic IP address in

use by the AP. The PC you use for AP administration should be on the management

VLAN, if VLANs are used in your network.

To log into the Web interface

1. On the PC, open a Web browser window.

2. In the address or location bar, type the IP address of the AP. Default IP address for

standalone ZoneFlex APs:

192.168.0.1

3. Press <Enter> to connect to the Web interface.

4. If a Windows security alert dialog box appears, click OK/Yes to proceed. The

Ruckus Wireless Admin login page appears.

5. In Username, type super.

6. In Password, type sp-admin.

7. Click Login.

The ZoneFlex Access Point Web interface appears.

In This Chapter

Logging Into the ZoneFlex Web Interface

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Navigating the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 119 120

Pas de commentaire

Rukus Wireless ZoneFlex 7731 Guide de l'utilisateur Page 51